The Nikon D3100’s scene modes choose an exposure method for you.
But there are three semi-automated methods (plus manual) that you can use to choose the appropriate shutter speed and aperture. You can choose among them by rotating the mode dial until the one you want is selected. Your choice of which is best for a given shooting situation will depend on things like your need for lots of (or less) depth-of-field, a desire to freeze action or allow motion blur, or how much noise you find acceptable in an image. Each of the D3100’s exposure methods emphasizes one aspect of image capture or another.
Coming articles will explain and introduces you to all four methods.
Aperture-Priority
In A mode (don’t confuse this with Auto; some point-and-shoot cameras use the letter A to represent automatic mode), you specify the lens opening used, and the D3100 selects the shutter speed.
Aperture-priority is especially good when you want to use a particular lens opening to achieve a desired effect. Perhaps you’d like to use the smallest f/stop possible to maximize depth-of-field in a close-up picture. Or, you might want to use a large f/stop to throw everything except your main subject out of focus, as in Figure 1, a chilling portrait of a menacing lizard. Maybe you’d just like to “lock in” a particular f/stop because it’s the sharpest available aperture with that lens. Or, you might prefer to use, say, f/2.8 on a lens with a maximum aperture of f/1.4, because you want the best compromise between speed and sharpness.
Aperture-priority can even be used to specify a range of shutter speeds you want to use under varying lighting conditions, which seems almost contradictory. But think about it. You’re shooting a soccer game outdoors with a telephoto lens and want a relatively high shutter speed, but you don’t care if the speed changes a little should the sun duck behind a cloud.
Set your D3100 to A, and adjust the aperture until a shutter speed of, say, 1/1,000th second is selected at your current ISO setting. (In bright sunlight at ISO 400, that aperture is likely to be around f/11.) Then, go ahead and shoot, knowing that your D3100 will maintain that f/11 aperture (for sufficient depth-of-field as the soccer players move about the field), but will drop down to 1/750th or 1/500th second if necessary should the lighting change a little.
A Lo or Hi indicator in the viewfinder, accompanied by a Subject Is Too Dark or Subject Is Too Bright warning on the LCD indicates that the D3100 is unable to select an appropriate shutter speed at the selected aperture and that over- and underexposure will occur at the current ISO setting.
That’s the major pitfall of using A: you might select an f/stop that is too small or too large to allow an optimal exposure with the available shutter speeds.
For example, if you choose f/2.8 as your aperture and the illumination is quite bright (say, at the beach or in snow), even your camera’s fastest shutter speed might not be able to cut down the amount of light reaching the sensor to provide the right exposure. Or, if you select f/8 in a dimly lit room, you might find yourself shooting with a very slow shutter speed that can cause blurring from subject movement or camera shake.
Aperture-priority is best used by those with a bit of experience in choosing settings. Many seasoned photographers leave their D3100 set on A all the time.
Summary
As I said earlier, the best knowledge comes from experiment and experience. However, in general, if you want a blurred background, open up the lens aperture (small f-stop numbers) and get close to the focus object. To make the background sharp do just the opposite.
So when you want to create a softer, blurrier background in your photos, use a wider (lower) aperture value, switch to a longer lens, and get in close to your subject.
See also
1- Controlling Depth of Field (DOF).
2- Depth of Field: One of the most important elements in photography.
3- Book by David D. Busch (NIKON D3100 GUIDE TO DIGITAL SLR PHOTOGRAPHY).
But there are three semi-automated methods (plus manual) that you can use to choose the appropriate shutter speed and aperture. You can choose among them by rotating the mode dial until the one you want is selected. Your choice of which is best for a given shooting situation will depend on things like your need for lots of (or less) depth-of-field, a desire to freeze action or allow motion blur, or how much noise you find acceptable in an image. Each of the D3100’s exposure methods emphasizes one aspect of image capture or another.
Coming articles will explain and introduces you to all four methods.
Aperture-Priority
In A mode (don’t confuse this with Auto; some point-and-shoot cameras use the letter A to represent automatic mode), you specify the lens opening used, and the D3100 selects the shutter speed.
Aperture-priority is especially good when you want to use a particular lens opening to achieve a desired effect. Perhaps you’d like to use the smallest f/stop possible to maximize depth-of-field in a close-up picture. Or, you might want to use a large f/stop to throw everything except your main subject out of focus, as in Figure 1, a chilling portrait of a menacing lizard. Maybe you’d just like to “lock in” a particular f/stop because it’s the sharpest available aperture with that lens. Or, you might prefer to use, say, f/2.8 on a lens with a maximum aperture of f/1.4, because you want the best compromise between speed and sharpness.
Aperture-priority can even be used to specify a range of shutter speeds you want to use under varying lighting conditions, which seems almost contradictory. But think about it. You’re shooting a soccer game outdoors with a telephoto lens and want a relatively high shutter speed, but you don’t care if the speed changes a little should the sun duck behind a cloud.
 |
Figure 1: Use Aperture-priority to “lock in” a large f/stop when you want to blur the background |
Set your D3100 to A, and adjust the aperture until a shutter speed of, say, 1/1,000th second is selected at your current ISO setting. (In bright sunlight at ISO 400, that aperture is likely to be around f/11.) Then, go ahead and shoot, knowing that your D3100 will maintain that f/11 aperture (for sufficient depth-of-field as the soccer players move about the field), but will drop down to 1/750th or 1/500th second if necessary should the lighting change a little.
A Lo or Hi indicator in the viewfinder, accompanied by a Subject Is Too Dark or Subject Is Too Bright warning on the LCD indicates that the D3100 is unable to select an appropriate shutter speed at the selected aperture and that over- and underexposure will occur at the current ISO setting.
That’s the major pitfall of using A: you might select an f/stop that is too small or too large to allow an optimal exposure with the available shutter speeds.
For example, if you choose f/2.8 as your aperture and the illumination is quite bright (say, at the beach or in snow), even your camera’s fastest shutter speed might not be able to cut down the amount of light reaching the sensor to provide the right exposure. Or, if you select f/8 in a dimly lit room, you might find yourself shooting with a very slow shutter speed that can cause blurring from subject movement or camera shake.
Aperture-priority is best used by those with a bit of experience in choosing settings. Many seasoned photographers leave their D3100 set on A all the time.
Summary
As I said earlier, the best knowledge comes from experiment and experience. However, in general, if you want a blurred background, open up the lens aperture (small f-stop numbers) and get close to the focus object. To make the background sharp do just the opposite.
So when you want to create a softer, blurrier background in your photos, use a wider (lower) aperture value, switch to a longer lens, and get in close to your subject.
See also
1- Controlling Depth of Field (DOF).
2- Depth of Field: One of the most important elements in photography.
3- Book by David D. Busch (NIKON D3100 GUIDE TO DIGITAL SLR PHOTOGRAPHY).
No comments:
Post a Comment