Article: Autofocus Modes

Your Autofocus Mode Options.

Choosing the right autofocus mode and the way in which focus points are selected is your key to success. Using the wrong mode for a particular type of photography can lead to a series of pictures that are all sharply focused—on the wrong subject.

There are two main autofocus options you need to master to make sure you get the best possible automatic focus with your Nikon D3100: Autofocus mode and Autofocus Area. I’ll explain each of them separately in different articles.

Autofocus Mode
--------------------
This choice determines when your D3100 starts to autofocus, and what it does when focus is achieved. Automatic focus is not something that happens all the time when your camera is turned on.

To save battery power, your D3100 generally doesn’t start to focus the lens until you partially depress the shutter release. (You can also use the AE-L/AFL button to start autofocus) Autofocus isn’t some mindless beast out there snapping your pictures in and out of focus with no feedback from you after you press that button. There are several settings you can modify that return at least a modicum of control to you.

Your first decision, if you’ll be composing your image through the optical viewfinder, should be whether you set the D3100 to AF-S, AF-C, AF-A, or Manual.

To change to any of the automatic focus modes, use the information edit menu and select the focus mode (AF is fifth from the bottom of the screen). With the camera set for one of the scene modes, AF-S will be used automatically, except when using the Sports/Action scene mode. To switch to manual mode, slide the AF/M or M-A/M switch on the lens to M.

AF-S
-----
In this mode, also called Single Autofocus, focus is set once and remains at that setting until the button is fully depressed, taking the picture, or until you release the shutter button without taking a shot. You can also use the AE-L/AF-L button, if you’ve set that button to lock focus when pressed.

For non-action photography, this setting is usually your best choice, as it minimizes out-of-focus pictures (at the expense of spontaneity).

The drawback here is that you might not be able to take a picture at all while the camera is seeking focus; you’re locked out until the autofocus mechanism is happy with the current setting. AF-S/Single Autofocus is sometimes referred to as focus priority for that reason. Because of the small delay while the camera zeroes in on correct focus, you might experience slightly more shutter lag. This mode uses less battery power.

When sharp focus is achieved, the focus confirmation light at the lower left will remain green, without flashing. By keeping the shutter button depressed halfway, you’ll find you can reframe the image while retaining the focus (and exposure) that’s been set.

AF-C
-----
This mode, also known as Continuous Autofocus, is the one to use for sports and other fast-moving subjects.

In this mode, once the shutter release is partially depressed, the camera sets the focus but continues to monitor the subject, so that if it moves or you move, the lens will be refocused to suit. Focus and exposure aren’t really locked until you press the shutter release down all the way to take the picture. You’ll often see Continuous Autofocus referred to as release priority.

If you press the shutter release down all the way while the system is refining focus, the camera will go ahead and take a picture, even if the image is slightly out of focus. You’ll find that AF-C produces the least amount of shutter lag of any autofocus mode: press the button and the camera fires. It also uses the most battery power, because the autofocus system operates as long as the shutter release button is partially depressed.

AF-A
-----
This setting is actually a combination of the first two. When selected, the camera focuses using AF-S AF and locks in the focus setting. But, if the subject begins moving, it will switch automatically to AF-C and change the focus to keep the subject sharp.

AF-A is a good choice when you’re shooting a mixture of action pictures and less dynamic shots and want to use AF-S when possible. The camera will default to that mode, yet switch automatically to AF-C when it would be useful for subjects that might begin moving unexpectedly. However, as with AF-S, the shutter can be released only when the subject at the selected focus point is in focus.

Manual Focus
----------------
In this mode, or when you’ve set the lens autofocus switch to Manual (or when you’re using a non AF-S lens, which lacks an internal autofocus motor), the D3100 always focuses manually using the rotating focus ring on the lens barrel.

However, if you are using a lens with a maximum aperture of at least f/5.6, the focus confirmation light in the viewfinder will glow a steady green when the image is correctly manually focused.

In manual focus mode, you can use the rangefinder feature to help you achieve sharp focus when you’re shooting in Program, Aperture-priority, or Shutter-priority mode. The rangefinder supplements the focus confirmation indicator at the left edge of the viewfinder by using the analog exposure indicator as a focusing “scale.”

In Figure 1, you can see that the focus indicator has illuminated all the bars to the right of the “zero” point. That means that the current focus is significantly behind the correct focus for the area in the red-highlighted focus point. To focus on the left-most battery, instead, you’d need to adjust the focus forward.

Figure 1: The manual focus scale in the viewfinder shows that the current focus is
significantly behind the subject at the selected focus point (highlighted in red). Focus more closely.

To summarize the instructions for using the rangefinder:
-----------------------------------------------------------------------

Turn the rangefinder On with this option if you want an additional manual focusing aid. With a manual focus lens and the rangefinder operating, the analog exposure display at bottom center in the viewfinder will be replaced by a rangefinder focusing scale. Indicators on the scale like those in Figure 2 show when the image is in sharp focus, as well as when you have focused somewhat in front of, or behind the subject.

Follow these steps to use the rangefinder:

1. Activate. Use the Setup menu’s Rangefinder entry to turn on the rangefinder.
   
   
2. Select a focus point. Use the multi selector to move the highlighting around in the frame.
   
   
3. Rotate the lens focus ring. Zoom lenses will have two rings; there’s no fixed convention as to whether the wider or narrower ring is the focus ring. Choose the one farthest from the zoom scale.
   
   
4. Watch the rangefinder. If the indicator is pointing towards the left, focus farther away. If the scale points towards the right, focus more closely.
   
   
5. Achieve sharp focus. When the subject you’ve selected with the focus zone bracket is in sharp focus, only two bars will appear, centered under the 0, and the focus confirmation indicator will stop blinking. If no 0 appears, the camera cannot determine focus.
   

Figure 2: Upper left: Correct focus;
Upper right: focus is grossly incorrect;
Center left: focus slightly in front of the subject;
Center right: focus slightly behind the subject;
Bottom left: focus significantly in front of the subject;
Bottom right: focus significantly behind the subject.